Stratford Eco Boiler 20kW Coal Or Woodburning Boiler Stove From Arada
Discontinued!
This model has been has been replaced by the EB12 HE
The Stratford Eco boiler ( SEB20 ) 20kW coal or wood burning boiler stove is the next generation of Stratford multi-fuel boiler stove from Aarrow Fires. Complete solid fuel home heating has never looked so good. The new Stratford boiler stove is a true powerhouse at the heart of any central heating system. Stratford stoves have been designed specifically as high performance boiler stoves. Whether you burn wood or solid fuel, this stove has the features you need to keep both your home and your water warm. In fact, you can choose the heat you need through its thermostatic controls – so you will always step out of a cold winter's day into a warm home.
Make your selection from the drop down box below
In developing their Stratdford brand Aarrow have included the technology developed by Aarrow in their Eco-burn range of high efficiency coal and wood burning multi-fuel stoves . Virtually all aspects of the old Stratford boiler stove have been re-designed and improved upon, to provide even greater reliability and performance than before. The highly efficient design and integrated smart technologies Arada and Aarrow stoves are famous for, remain. Features include curved surfaces to add strength to the stove body, insulated boiler top to ensure maximum heat transfer to water, thermostatic control. Single curved door with curved glass.
Smart Technology from Aarrow
Primary Air Diversion grate
The air diversion grate allows the flow of air to come up through the grate for coal or to come in over the top of the grate for wood to ensure each fuel burns in its ideal conditions. The control for this system is clearly marked on the side of the stove and can quickly and easily be set for either coal or wood.
Airwash
Aarrow's airwash system uses a curtain of preheated air to protect the glass from darkening with unburnt material ensuring you always have crystal clear view of your fire.
The following advice is designed to answer some of the more commonly asked questions and give guidance on getting the best out of a Stratford stove.
1.
Contact your local Heating Engineer prior to ordering find one here : www.hetas.co.uk , ask them to calculate the BTU/kW requirements of your system, it is important to match the BTU/kW output of the boiler to that required by your system. The number of radiators in average installation given here is for guidance only, and should not be used alone for choosing the right size stove.
2.
Stratford boiler stoves should only be installed in an indirect system.
3.
A flue draw measurement should be taken at the time of installation and overdrawing flues should have measures taken to reduce their draw. Uncorrected, an overdrawing flue may mean that the stove is unable to shut down and slumber once installed, this can cause over firing and may damage the appliance.
4.
A heat leak radiator should be installed that is 10% of the rated output of the boiler.
5.
A radiator may be required in the room where the boiler is installed as the radiated heat outputs of boiler models are fairly small due to the efficiency of the boiler.
6.
A pipe stat must be fitted to the return hot water, set at 45°C.
7.
A rust inhibitor should be added to the heating once the engineer is happy there are no leaks from the system.
8.
If using solid fuel ensure only recommended fuels are used, and definitely no Petroleum Based fuels. Please refer to your installation manual for further information.
9.
If burning wood use only seasoned, dry wood. Unseasoned and wet wood will burn inefficiently and can damage flue and stove. For every twelve hours alight a period of fast burn should be undertaken for up to 20 minutes to ensure the flue is cleared.
Tech Data
Heat Output:
20kW
Nominal Output to room:
7.75kW
Nominal Output to water:
12kW
Number of radiators in avg. installation:
8-10
Fuel:
Multi-fuel
Height:
670mm
Width:
565mm
Depth:
430mm
Height to centre of rear flue:
505mm
Depth from back to centre of top flue:
160mm
Flue Diameter:
127mm
