5" Basic Twin Wall Insulated Stainless Steel Class1 Flue Kit
Ordering a twin wall system can be tricky, we know this however each kit should include several essential items so that it will perform as the manufacturers intended. Our kits as standard include:
-
An Appliance Connector (to connect the stove or stove pipe to the twin wall flue system)
-
2x 1m straight length of Class1 twin wall flue (if you need more select it from the options box)
-
A Fire Stop Trim Plate (this is for internal use where the flue goes into either a wall or cieling)
-
Rafter Support Brackets
-
Aluminium Roof Plate (by default an adjustable angle one, if you need flat, select it from the options)
-
3x locking bands
-
Storm Collar (this prevents rain running down the flue and into the roof plate.
-
Standard Cowl Terminal
Use this as a base kit when ordering your twin wall system. Additional bends junctions and straight sections should be added as needed from our main parts category here
| 
